Alternative energy sources

Development and implementation of integrated solutions for energy conservation, power supply and heating systems

Alternative energy sources

SOLAR POWER STATION

independent and uninterrupted power supply
profitable investment with stable profit from “green tariff”
reliable work more than 25 years
inexhaustible and ecological energy source

GEOTHERMAL HEAT PUMPS SENSO

Profitability (reduction of heating costs in 4 times)
Availability
Reliability
Environmental

THERMAL ENGINEERING CALCULATION

Calculation of heat loss in premises/buildings during the cold period of the year. Heat engineering calculation is carried out for the purpose to determine the heat-shielding properties of the building, the choice of the optimum capacity of the heating devices, the calculation of the optimal thickness and type of insulation.

ENERGY AUDIT

Energy audit is a set of measures aimed to identificate the efficiency of the energy resources use and assessing the potential for their savings, development the most technically and economically feasible measures to improve the efficiency of energy use.

Our experience

houses with heat pumps Senso

A heating system with heat pumps Senso have been built in 9 houses in the period from 2017 to 2018

20 geothermal thermal pumps SENSO were installed
the total heat capacity of installed equipment – more than 63 kW

solar power stations

В период 2017-2018 гг. построено 5 солнечных электростанций

The total installed capacity of the constructed solar power plants is 90 kW
3 terrestrial type, 2 – roof
4 power plants are connected to the “green tariff” and generate monthly income

energy audits

There have been conducted 9 energy audits during the heating period 2017-2018

Energy audit was conducted in health facilities, restaurants, private and commercial facilities.
The total area of surveyed objects is 9,600 sq.m.

heat engineering calculations

There have been done 28 heat engineering calculations

Thanks to the developed recommendations, customers can save up to 60% on heating
heat engineering calculations were carried out for objects of state, commercial and private property.

Our projects

The heating system of the house with an area of 310 m2, which uses the heat pumps Senso as the main source of heat.

The system reduces annual heating costs by 3.7 times.

The heating source is the heat pump Senso 1.03

Quantity – 4 pcs.

Installed power of TN – 10.8 kW

The heating system of the house with an area of 300 m2, which uses the heat pump Senso.

The system reduces annual heating costs by 2 times.

The heating source is the heat pump Senso 1.06

Quantity – 1 pc.

Installed power of TN – 6,1 kW

The heating system of the house with an area of 55 m2, which uses the heat pump Senso.

The system provides heat in the house throughout the heating period.

The heating source is the heat pump Senso 1.03

Number of HP – 1 pc.

Installed power of HP – 2,7 kW

The heating system of the house with an area of 300 m2, which uses the heat pump Senso as the main source of heat.

The system reduces annual heating costs by 2.3 times.

The heating source is the heat pump Senso 1.06

Quantity – 1 pc.

Installed power of HP – 6,1 kW

The heating system of the house with area of 240 m2, which uses the heat pump Senso as the main source of heat.

The heating source is the heat pump Senso 1.06

Quantity – 1 pc.

Installed power of HP – 6,1 kW

Energy efficient house with heating system, which is based on the heat pump Senso as the main source of heat and solar power system.

The heating source is the heat pump Senso 1.04

Quantity – 1 pc.

Installed power HP – 4.0 kW.

Heating costs – 620 UAH/month.

Electric power source – solar power station 15 kW

Profit -1900 dollars per year

The heating system of the house, with an area of 90 m2, which uses the heat pumps Senso as the main source of heat.

The system reduces annual heating costs by 3 times.

The heating source is the heat pump Senso 1.03

Number of HP – 1 pc.

Installed power of HP – 2,7 kW

Solar power supply system of the house with the capacity of 30 kW.

The system provides own electricity consumption to the household, as well as generates monthly income from the sale of electricity at the “green tariff”

The capacity of the solar power plant is 30 kW

Construct – ground

Area – 323 m2.

Profit – 5000 dollars per year

Solar power supply system of the house with a capacity of 30 kW.

The system provides own electricity consumption to the household, as well as generates monthly income from the sale of electricity at the “green tariff”

The capacity of the solar power plant is 30 kW

Construct – ground

Area – 243 m2

Profit – $ 3,000/year

Solar power supply system of the house with a capacity of 10 kW.

The system provides for the actual consumption of electricity by the building, in the summer it brings revenue from the sale of electricity at the “green tariff”

The power of the solar power plant is 10 kW

Construct – roof

Area – 85 m2.

Attachments

Total Attachments: 1

Solar power supply system of the house with a capacity of 5 kW.

The system ensures the proper consumption of electricity by the household

The power of the solar power plant is 5 kW

Construct – roof

Area – 35 m2

The heating system of the house with an area of 250 m2, which uses the heat pumps Senso as the main source of heat

The heating source is the heat pump Senso 1.05

Quantity – 2 pcs.

Installed power HP – 10 kW

The heating system of the house with an area of 360 m2, which uses the heat pumps Senso

The heating source is the heat pump Senso 1.05

Quantity – 3 pcs.

Installed power HP – 15 kW

Our services

Organization/implementation of the construction works

We carry out preparatory measures that ensure quality and timely construction of engineering systems within the framework of this service. During the construction of the facility we organize the entire complex of construction works in accordance with the approved project documentation, monitor the construction schedule, and carry out the installation work. Prior to the execution of construction works, the creation of engineering systems according to the developed project. The result of the construction is a functioning system.

Selection, delivery, and installation of equipment

We carry out selection, delivery and installation of equipment for the specific tasks` solution and wishes of the customer in accordance with the developed and approved project.

Projecting

The complex of works aimed at creating and maintaining engineering systems. There are carried out research and calculations during projecting. On their basis are developed individual technical solutions, diagrams and drawings describing the engineering system and its parameters.

Object inspection

A set of activities aimed at gathering information about the object with the purpose to develop an individual technical solution. Object inspection include the survey of buildings and territories, measurement drawings, analysis of the building constructions` existing state, engineering networks (heating system, electrical supply).

Technical support

A set of organizational and technical measures aimed at the continuous operation of engineering systems, including rapid troubleshooting and the resolution of issues which arise during the operation.

Warranty and post-warranty service

Warranty and post-warranty service consists in that to eliminate defects / failures in the work of the engineering system during the period of operation for its further intended use to ensure.

Start-up and adjustment works

The complex of works on adjustment and testing of equipment in order to provide working parameters, safe and continuous functioning of the engineering system.

Author’s supervision during construction

The author’s supervision over the compliance of the construction works with the developed project solution is carried out during the construction of engineering systems. Author’s supervision is carried out by the chief engineer of the project.

Partners

LITTO

Litto is an innovative energy company. The company`s key specialization: solar inverters, car chargers, intelligent control and other solutions with modern energy technologies.

The company has gathered a large number of outstanding science and technology professionals with extensive experience in energy and inverter technology. The company operates successfully in the markets of China, Australia, Thailand, the Netherlands, the United Kingdom, the Philippines, India and other countries.

Litto manufactures products and solutions in the following categories:

single-phase inverters
three-phase inverters
solar charge controllers

PJSC “Odeskabel”

Cable and wire products of PJSC “Odeskabel” are widely represented on the CIS market. In recent years, the company has launched the release of economic cables broadband access round and flat section for subscriber connections. In the near future – production of an inside-object access cable for local area networks, as well as a distribution cable for vertical laying inside buildings. The company has standards of quality ISO 9001: 2000 and DSTU ISO 9001: 2001

The company produces the products and solutions in the following categories:

Communication cables
Optical cables
LAN cables
Radio Frequency Cables
Power cables, wires, cords
Heating cables

AEG

For more than 130 years, AEG has taken a leading position in the area of technological innovation and engineering in the field of industrial and consumer electronics with demanding quality standards for each product and is the leading German brand that belongs today to Electrolux Group. The same uncompromising quality is achieved today in the portfolio of products that work from solar energy, which ensures reliability, aesthetics and ease of use. Every AEG product is designed to always be ahead of the world of smart solar energy to give users complete control over their profits and comfort. Solar energy products are produced worldwide by the German license company Solar Solutions GmbH and distributed to international markets through a solid network of local partners.

Thanks to the individual monitoring module (AEG IMM), the elegance and power of the new inverter series with advanced monitoring features and the high efficiency and durability of its solar panels, Solar Solutions GmbH consistently provides excellent customer experience, as evidenced by the continuous increase in the network of partners and the growth of the world sales.

From the first signed projects in the UK (totaling 13.54 MW), to the largest solar roof in Cuba (2 MW), set at the end of 2017, to the latest AEG IMM roof projects (total 2.5 MWp) in Hungary, AEG products have been successfully distributed worldwide through a reliable partner network that covers more than 30 countries worldwide, from Europe to the Middle East, as well as from Africa to Latin America.

Today, “Bancomzvyazok” will be able to provide its customer with the same experience of the brand AEG, which has proved its popularity all over the world.

The Association of “Ukrainian Unification Project Organizations

The Association of “Ukrainian Unification Project Organizations” is a voluntary association of project and scientific-project organizations in Ukraine, which united to solve the issues of the project business and promote the improvement of the activities of each organization within the Association. The organizations fully maintain their economic, financial and legal independence within the Association. The Association was founded in December 2005, its founder was the Academy of Construction of Ukraine.

The purpose of the Association’s activity is to consolidate the intellectual and scientific and technical potential of Ukraine’s project and scientific organizations and to direct it to ensure compliance of the project business with the requirements of the world standards, the promotion of development, increase of the efficiency and quality of the activity of each project and the scientific-project organization is the member of the Association.

The main activities of the Association:

Realization in the projecting, in the project-research works of best practices through exhibitions, seminars, conferences, publications with the participation of Association members;
initiation of the improvement and the development of the normative documents, the legislative acts which aimed at improving the project business in Ukraine;
Improvement of the pricing policy, bringing prices of projecting into line to the market prices, taking into account a world experience.
Information support of the Association organizations

The scientific researched, projected, surveyed organizations of the Association “Ukrainian Unification Project Organizations” carry out the following project works:

residential quarters and residential districts
residential and civilian buildings
industrial buildings
buildings and infrastructure of a transport and communications
objects of the water sector
special facilities for the processing of domestic and industrial waste
objects of the petrochemical industry
objects and infrastructure of the air transport

water, gas, heating, electric networks and structures
metro, underground construction objects, including parking water wells and their equipment
agricultural and food-processing facilities
objects of health, sports, trade
reconstruction and restoration of buildings
objects of alternative energy sources (solar power plants, heat pumps) and their construction